The Click-A-Tune is a board for MP3 audio playback.

Individual sounds or groups of sounds can be triggered with a number of switch inputs (up to 36). Alternatively the unit can be programmed to play continuously. The sound can be stored on-board in the large 256MByte flash, on plug-in USB memory sticks, or MicroSD cards.

• Provides maximum application up-time
• Connects to internal USB port
• 'Presses' the PC RESET button in event of software failure
• Drivers for Windows® and Linux®

A very simple device for shifting serial signals at digital/TTL levels to RS232. Works on 3V to 5V supplies and logic levels. 9 pin DCE and DTE connector. There are Tx and Rx indicator LEDs.

This is one of those devices that everyone needs at some stage during embedded systems development!

Tagger is a USB device that connects a PC to a JTAG interface. Data throughput is a respectable 800KBits/second (many times faster than a parallel port). Works with targets of 3 to 5V.

Software interface is through a low level driver. Sample code exists to demonstrate the in-circuit programming of Flash devices directly connected to an Intel StrongARM and an AMD Alchemy (AU1000, 1100, 1500). Sample code also exists to program a small selection of PLDs.