Tagger is a USB device that connects a PC to a JTAG interface. Data throughput is a respectable 800KBits/second (many times faster than a parallel port). Works with targets of 3 to 5V.
Software interface is through a low level driver. Sample code exists to demonstrate the in-circuit programming of Flash devices directly connected to an Intel StrongARM and an AMD Alchemy (AU1000, 1100, 1500). Sample code also exists to program a small selection of PLDs.
A very simple device for shifting serial signals at digital/TTL levels to RS232. Works on 3V to 5V supplies and logic levels. 9 pin DCE and DTE connector. There are Tx and Rx indicator LEDs.
This is one of those devices that everyone needs at some stage during embedded systems development!
'Presses' the PC RESET button in event of software failure
Drivers for Windows® and Linux®
The USB PC Watchdog is a device intended to automatically reboot a PC in case of system crash.
Once the USB PC Watchdog has been enabled, your application must 'kick' the device on a regular basis. If the watchdog does not detect a 'kick' within a timeout period the reset button of the PC is 'pushed'. Simple to install
The Click-A-Tune is a board for MP3 audio playback.
Individual sounds or groups of sounds can be triggered with a number of switch inputs (up to 36). Alternatively the unit can be programmed to play continuously. The sound can be stored on-board in the large 256MByte flash, on plug-in USB memory sticks, or MicroSD cards.
